أسرة منخفضة الارتفاع لأجنحة كبار السن وإعادة التأهيل

When a patient can no longer safely step down from a standard-height bed, the answer is not a lower mattress; it is a bed built to bring the sleeping surface close to the floor. Low-height hospital beds reduce the distance in a fall, make transfer easier for a patient who has lost leg strength, and give a caregiver a safer reach. This guide covers what a low-height bed has to provide, the floor heights that matter, and the safety features a ward should specify.

Match the bed to an ageing population on the أسرة المستشفيات range, with the low deck and the full adjustment range specified for a falls-risk ward.

What low-height means in practice

Low-height is not a single number; it is a range that usually starts at roughly 25 to 30 cm to the deck at its lowest point, against a standard bed that sits much higher. The lower the deck, the shorter the fall if a patient rolls out, and the easier it is for a patient to slide their feet to the floor and stand. But the bed still has to rise high enough for a caregiver to work safely, so a low-height bed typically keeps the full range of adjustment rather than trading the low position for a fixed short height. The result is a bed that is low when the patient is sleeping and higher when the care task needs it.

Who it is for and what it changes

Low-height beds belong in elderly care, rehabilitation, and any ward where falls are a reported risk. For a patient recovering a gait, a bed that lets them plant both feet on the floor and push up with both hands is genuinely different from one that leaves them dangling at a height they cannot control. For a caregiver, the benefit is reach and back protection; they can raise the bed for a dressing change and lower it for a transfer without lifting. The bed also changes the incident rate, because the most serious injuries in a fall come from the height and the floor condition, and reducing the height reduces the severity even when a fall still happens.

Safety features to specify

A low-height bed is only useful if the surrounding safety is right. Specify a full-length side rail or a split rail with a controlled gap that stops a patient from being trapped between the rail and the board, and a mattress that fits the deck without a gap at the sides. Add a bed-exit alarm or a floor mat for the highest-risk patients, because a low bed cuts the severity of a fall, not the frequency. The casters should lock securely, and the height adjustment should be smooth enough that the bed does not jolt when it moves. The design guidance for healthcare facilities sets the expectation for room and equipment dimensions, and the إرشادات FGI are the reference for how the built environment supports patient safety.

Planning a rehabilitation or elderly-care ward? Send Sanyang your target deck height and patient mix for a low-height bed spec.

قراءات ذات صلة

See the bed range on أسرة المستشفيات and the ward program on OEM / ODM.

الأسئلة الشائعة

ما هو أدنى ارتفاع يمكن أن يصل إليه سرير المستشفى المنخفض؟

تبدأ معظمها من حوالي 25 إلى 30 سم إلى سطح السرير عند أدنى إعداد، مقارنة بسرير قياسي يكون أعلى بكثير، مع الحفاظ على نطاق التعديل الكامل لوصول مقدم الرعاية.

من يستفيد من السرير المنخفض الارتفاع؟

المرضى كبار السن، ومرضى إعادة التأهيل، وأي شخص معرض لخطر السقوط، لأن سطح النوم المنخفض يقصر مسافة السقوط ويجعل الوصول بالأقدام إلى الأرض أسهل.

هل يقلل السرير المنخفض من فرصة السقوط؟

إنه يقلل من الشدة، وليس من التكرار. السرير المنخفض يقصر مسافة السقوط، لكن أجهزة إنذار الخروج من السرير، والتحكم في فجوة القضبان، وملاءمة المرتبة الجيدة لا تزال ضرورية لمنع السقوط نفسه.

لمزيد من التفاصيل، راجع بطارية احتياطية لسرير المستشفى وخفض الطوارئ.

لمزيد من التفاصيل، راجع نقالة أو سرير مستشفى.